Kolink Phalanx Midi Tower RGB Gaming Case - Black

Product information: Phalanx Midi Tower RGB Gaming Case - Black The Phalanx Midi-Tower builds on Kolinks case line-up with a stylish new dRGB-LED model complete with a tempered glass side panel and a brushed aluminium front as well as a mesh cut-out. It is defined by a strikingly attractive design that is paired with a multitude of mounting options for fans, watercooling and storage devices. The interior of the black Phalanx is as capacious as it is stylish. The Features of the Kolink Phalanx at a Glance Designer case in black for motherboards up to E-ATX Tempered glass side panel and front with mesh cut-out Four pre-installed digitally addressable 120 mm dRGB fans, 6 possible in total I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out Supports three radiators in 120-mm-, 240- and 280 mm formats 2x 3,5 or 4x 2,5 storage mounts Supports graphics cards up to 37 cm long & CPU coolers 16 cm tall RGB motherboard control using Asus, MSI and Asrock motherboards Four pre-installed dRGB Fans and Tempered Glass Side Equipped with 7 PCI slots, the chassis of the Kolink Phalanx consists of steel and the left side bears an attractive tempered glass window. This is not just attached with screws; it folds out conveniently thanks to two hinges. The lower section is completely covered by a shroud that helps conceal the PSU and any less-than-elegant cabling. The two 3,5- or 2,5 drive bays are also located here. There is also space for a further 2 x 2.5 drives on the rear of the case using the predrilled holes. To ensure excellent airflow, the case offers four pre-installed 120mm fans with digitally addressable dRGB-LED lighting, as well as mesh strips in the front of the case. Three fans are installed in the front of the case, meaning they are visible through the mesh at the front. One is located in the back. All fans are connected to the included fan hub/RGB controller. Additionally, the dRGB lighting can be controlled using the bundled remote control, the reset switch ...