Wickes Galvanised Joist Hanger 50x225mm

A single piece timber-to-masonry hanger for building into the inner leaf of new external cavity and internal walls Single piece timber-to-masonry hanger for building into the inner leaf of external cavity and internal walls Wide masonry flange for masonry use of compressive strength 2.8N/mm² and above Manufactured from 2mm thick pre-galvanised mild steel to BS EN 10327: 2004: DX51D + Z600 75mm load bearing surfaces All hanger 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists. A minimum height of 675mm of set masonry must be in position above the supporting flange before any load is applied For lateral restraint an additional heavy-duty strap must be used Fix the joist in place using 3.75 x 30mm galvanised nails