Joist Hanger 125x50mm

A single piece timber-to-masonry hanger for building into the inner leaf of new external cavity and internal walls Single piece timber-to-masonry hanger for building into the inner leaf of external cavity and internal walls. Wide masonry flange for masonry use of compressive strength 2.8N/mm² and above. Manufactured from 2mm thick pre-galvanised mild steel to BS EN 10327: 2004: DX51D + Z600. 75mm load bearing surfaces. A minimum height of 675mm of set masonry must be in position above the supporting flange before any load is applied. For lateral restraint an additional heavy-duty strap must be used. Fix in place using 3.75 x 30mm galvanised square twist nails.