Johnstones Woodcare Indoor Clear Gloss Varnish - 750ml

Johnstones Indoor Varnish is a tough, marine quality high gloss varnish that is suitable for all interior wood work. Its specially blended formula has been designed to make it as hard wearing and anon-yellowing finish. Furthermore this varnish is quick drying and low odour emitting, this makes it far superior against traditional varnishes. Contents: 750ml Tin Coverage: Up to 9m² Can be applied with a brush Provides a weather protective layer High VOC Content: 25% - 50% (Volatile Organic Compounds) Suitable for use on exterior and interior wood Technical Data < Application Surface Preparation All surfaces should be clean, dry and free from grease. Remove any loose or flaking paint from the surface and t reat any mould or lichen with a fungicidal wash as directed. Sand smooth natural planed wood and wipe clean with white spirit to remove any natural oils or resins and allow to dry. Rub down bare timber and glossy surfaces with a fine waterproof abrasive paper. Avoid inhalation of dust < other substances when priming any surface.<br>Application: Stir well before use and apply by brush along the grain of the wood, paying particular attention to the end grain. Apply a liberal coat of Johnstones to the surface and paint in one smooth motion in one direction to achieve the best results. Further to this between coats lightly sand surface to get optimum results. Drying time Depending on the nature < porosity of the surface, allow 4 hours drying between coats under normal conditions. Touch dry: Within 1 Hour Completely dry: Within 12 Hours Cleaning Remove as much product as possible from application equipment before cleaning. Clean all equipment immediately after use in warm soapy water and rinse them thoroughly. Coverage Guide 750ml of Johnstones Woodcare Indoor Varnish will cover approximately 9m ² depending on the nature < porosity of the surface. Storage Replace lid onto the tin firmly and store in cool dry conditions between + 5 °C and +25°C. Storage o...