Autoglym Polar Wash 833845

Autoglym Polar Wash Effective cleaner for home pressure washers Suitable for Paintwork Not suitable for use on soft top convertibles Safe and effective cleaner Safe and effective cleaner for home pressure washers Autoglym Polar Wash gives pole to pole exterior perfection, a safe and effective cleaner for home pressure washers. Polar Wash should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Autoglym Polar Blast . Usage direction: Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt. Rinse thoroughly from the bottom up and dry. Additional Notes: This impressive cleaner will cover your vehicle in a thick blanket of foam that makes light work of dirt, traffic film and road grime removal. Cleaning Stage : Pre Wash Shop the bundle here: Autoglym Polar Car Cleaning Bundle Click here to find out more about the Autoglym range.